热变形对GH4169合金中NbC析出相尺寸形貌影响研究

通过Gleeble3500热模拟试验机进行热压缩试验并结合微观组织观察和统计分析，研究了热变形对GH4169合金中NbC颗粒尺寸形貌、分布特征的影响规律。研究表明压缩过程中的绝热效应会导致试样心部温度的进一步升高，从而为变形过程中的NbC回溶提供条件。NbC颗粒与基体在变形过程中形成的高位错密度区促进了元素的扩散，并加速了小曲率半径的尖角区域回溶和钝化。随变形量的增加NbC回溶趋势增加，其平均尺寸与体积分数均呈降低趋势。变形过程金属流动会促进NbC颗粒的位移，在70%的变形量下，NbC颗粒平均间距增加趋势显著高于30%和50%变形量试样。因此随变形量的增加，NbC颗粒有从链状→链条弯曲→链条方向改变→弥散分布的分布特征，促进基体中原链状NbC呈细小、弥散分布。研究结果为GH4169闪光焊接性能的提高提供了直接的参考。     

On the limit theory of the Gaussian SQMLE in the EGARCH(1,1) model

We derive the limit theory of the Gaussian stable quasi maximum likelihood estimator for the stationary EGARCH(1,1) model when the squared innovation process has marginals with regularly varying tails. We derive regularly varying rates and limiting stable distributions. We perform Monte Carlo experiments to assess the extent of the parameter space corresponding to the invertibility condition, and the quality of the asymptotic approximation.     

SMART-Reactors: Tailoring Gas Holdup Distribution by Additively Manufactured Lattice Structures

In chemical process engineering, fast gas-liquid reactions often suffer from an inefficient distribution of gas and therefore mixing and mass transfer performance. This study deals with the possibility of influencing the local gas holdup and bubble size distribution in a gas-liquid process using additively manufactured lattice structures (AMLS). The used measuring technique to study bubble size, velocity, and the local gas holdup is a photo-optical needle probe. By using AMLS, a significant radial homogenization of the local gas holdup and the mean bubble size is achieved. Furthermore, it can be demonstrated that the bubble size can be tailored by the geometry of the inserted structure. It is illustrated that the mean bubble velocities are lowered within the lattice resulting in a higher residence time of the dispersed phase with an impact on the mass transfer performance within the AMLS.     

Bayesian threshold selection for extremal models using measures of surprise

Statistical extreme value theory is concerned with the use of asymptotically motivated models to describe the extreme values of a process. A number of commonly used models are valid for observed data that exceed some high threshold. However, in practice a suitable threshold is unknown and must be determined for each analysis. While there are many threshold selection methods for univariate extremes, there are relatively few that can be applied in the multivariate setting. In addition, there are only a few Bayesian-based methods, which are naturally attractive in the modelling of extremes due to data scarcity. The use of Bayesian measures of surprise to determine suitable thresholds for extreme value models is proposed. Such measures quantify the level of support for the proposed extremal model and threshold, without the need to specify any model alternatives. This approach is easily implemented for both univariate and multivariate extremes.     

A new method to synthesize high solid content waterborne polyurethanes by strict control of bimodal particle size distribution

A new method named two-step emulsification process was developed to synthesize high solid content waterborne polyurethanes by strict control of the bimodal particle size distribution. In the first step, a series of 40% solid content polyester-based (WPU-1) with low content of hydrophilic group and large particle size were firstly synthesized. In the second step, polyether-based prepolymers (WPU-2 prepolymers) with high content of hydrophilic group were firstly prepared and WPU-1 emulsions were used to emulsify WPU-2 prepolymers to obtain the final emulsions with high solid content (WPU-3). The particle size of WPU-3 present bimodal distribution and the diameter ratio and volume percentage of large particles to small particles in WPU-3 were able to be strictly controlled by this method. The viscosity of WPU-3 with 55% solid content was only 489.1 mPa s⁻¹ when the diameter ratio of large particles to small particles was 9.2 and the volume percentage of large particles was 74%.     

Impact of shape representation schemes used in discrete element modelling of particle packing

In different computer models, shape is represented using different methodologies, to varying degrees of precision. This paper examines two approaches to shape representation, and their effects on accuracy in the context of cylindrical particle packing. Two discrete element method (DEM) based software packages are used. A X-ray CT scan of a packed bed provides the experimental measurements for comparison. Eight sphere-composite representations of the same cylindrical pellet were tested. Two of these gave results that quantitatively follow experimental measurements. A range of factors that in theory could affect accuracy of the simulation results are examined, including edge roundedness, surface roughness and restitutional behaviour as a function of sphere-composite representations. The conclusion is that, for packing at least, matching the object's overall shape and dimensions is not enough. Only when a high enough resolution is applied to corners and edges, could the sphere-composite approach possibly match the experimental data quantitatively.     

The influence of sodium caseinate on the physical properties of spray‐dried honey

The aim of this work was to spray dry honey (rape and buckwheat varieties) with Arabic gum (AG) as a carrier alone or in combination with sodium caseinate (1% and 2% w/w NaCas) as a drying aid. Powder recovery ranged from 66.2 ± 0.7% to 75.8 ± 4.9%, and the values were significantly higher for samples containing NaCas. Powders were characterised by good flowability, the addition of NaCas had positive impact on this factor. However, the hygroscopicity of protein‐containing powders was higher, especially at 2% w/w of NaCas. Powders hygroscopicity was related to particle size: AG powder of the smallest particle size was the most hygroscopic, while the particle size did not affected flowability, which was strongly related to the feed solution composition. Based on the obtained results, it was concluded that the addition of 1% w/w of NaCas as a drying aid during buckwheat and rape honey spray drying with Arabic gum as a carrier is favourable, while the further increase of protein content does not give additional benefits.     

Influence of case-carburizing and micro-defect on competing failure behaviors of Ni–Cr–W steel under gigacycle fatigue

Axial loading test was performed to investigate the influence of case-carburizing and micro-defect on competing failure behaviors of Ni–Cr–W Steel under gigacycle fatigue. The interior failures induced from inclusion and microstructural inhomogeneity become the predominant failure mode in the life regime beyond 10⁵ cycles. The case-carburizing has no effect on the fatigue strength with interior failure. Compared with the lower limit values of experimental S–N data, the predicted results by using GP distribution is relatively suitable. From the viewpoint of reliability, the modeling method of interior S–N curve with the maximum defect size at a given probability is satisfactory.